a.The reflex sight does not hold a group of hits at the first time shooting
Please examine the factors below:
(1) Be sure that all screws on the rifle’s action are properly tightened.
(2) Be sure the rifle barrel and action are clean and free of excessive oil or copper fouling.
(3) Maintain a good shooting technique and use a solid rest.
(4) Some rifles and ammunition don’t work well together—try different ammunition and see if accuracy improves.
(5) Be careful, the reflex sight may be with a “parallax issue” if not adjusted well.
b.The reflex sight does not hold a group of hits after using for a while
Please check:
(1) Your rifle and caliber (whether the rifle’s caliber is too large and the rifle has too much recoil )
(2) Your shooting distance (whether the shooting distance is too far away from the set hit point)
P.S. whether it’s at first-time shooting or not, you should always check the point of impact’s spread deviation, and make adjustments accordingly.
Please check the upper factors and make some adjustments, if the reflex sight still can’t hold a group of hits, please contact service@vectoroptics.com for support.
