FAQS

FAQS Filter

All Continental Series All Frenzy Series All Maverick Series All Paragon Series All Victoptics Series General questions Red Dot Sight Troubleshooting Riflescope Troubleshooting Thermal imaging and NV device troubleshooting Vector Optics Accessories Troubleshooting

Hello can you please told me for what Reason Are there those two screwes on the back of your red Dot victoptics spx 1x22, thank you for answer...

Hello, friend. After tightening, the two screws can be used to lock the elevation and windage.
Hi! how many joules can the 2-6x32mm bezel hold? For Air rifle 5.5 Rossi Dione 3G.

Hi friend, I'm afraid that VictOptics 2-6x32 can't hold it, it's mainly for airsoft, but you can check scopes from our main brand Vector Optics: https://vector2007.com/
Hi. Today I bought a scope from you. (Vector Optics OPSL20 Victoptics PC 3-9x40) Unfortunately I cannot find any data and dimensions of the reticle: VMD-2. is it a MIL reticle? or MOA? what are the dimensions of the lines in the reticle? Thank you for you

Hi friend, it's a MOA reticle, for dimensions, check out the picture here for reference.
Will it fit a 24mm killflash on the S6 1-6X24 SFP LPVO or do i need a 30 mm?

Hi, the S6 riflescope has a 30mm tube, so you can go for the 30mm one
Can I use the paragon prism scope without the riser? I'm planning to add on a m16 carry handle, so it needs to be low profile. Is it possible?

Hi. Yes. A low profile can replace the riser if you remove the plate.
Is there a VOD adapter plate to put the Frenzy on the Paragon 4x prism scope?

Hi. The top plate is MAG footprint (compatible with RMS footprint).
Will my Paragon 4x24 Mini Prism (SCPS-M04) fit on Vector Optics RUM cantilever Picatinny Riser T1/T2 Mount (SCPSM-01)?

Yes, it can fit.
I'd like to know whether the reticle of the paragon 3x and 4x optics has unknown target range estimation capabilities like the primary arms cyclops or the raptor reticle.

Hi, please check the pictures below for reference. The outer circle can estimate range from 100 to 400yds, and the inner BDC reticle can estimate range from 100 to 600yds.

1 ...12 13 14 ...19

Hello can you please told me for what Reason Are there those two screwes on the back of your red Dot victoptics spx 1x22, thank you for answer...

Hi! how many joules can the 2-6x32mm bezel hold? For Air rifle 5.5 Rossi Dione 3G.

Hi. Today I bought a scope from you. (Vector Optics OPSL20 Victoptics PC 3-9x40) Unfortunately I cannot find any data and dimensions of the reticle: VMD-2. is it a MIL reticle? or MOA? what are the dimensions of the lines in the reticle? Thank you for you

Will it fit a 24mm killflash on the S6 1-6X24 SFP LPVO or do i need a 30 mm?

Can I use the paragon prism scope without the riser? I'm planning to add on a m16 carry handle, so it needs to be low profile. Is it possible?

Is there a VOD adapter plate to put the Frenzy on the Paragon 4x prism scope?

Will my Paragon 4x24 Mini Prism (SCPS-M04) fit on Vector Optics RUM cantilever Picatinny Riser T1/T2 Mount (SCPSM-01)?

I'd like to know whether the reticle of the paragon 3x and 4x optics has unknown target range estimation capabilities like the primary arms cyclops or the raptor reticle.